How to.... Martian Bases.

Hi, this is my first "how to..." , first of many i hope, most of the techniques I've used here can be found elsewhere on the net, so im not making out like im an expert or anything just an enthusiastic amateur, anyhow ive brought it all together here for you guy's to look at, hope you enjoy it.

Stage 1 preparation.

I wanted my broadside to be standing on something on top of the base and so decided on a large plastic cog that i removed from a child's broken toy, with the broadsides legs not been able to reposition easily  i also needed to build a small mound so the model didn't look too lopsided on completion.

I used three pieces of 1mm plasicard, each slightly smaller than the other the top one only slightly bigger than the broadsides left foot. I then glued them into position.

The theme im going for is rusted battlefield debris on a red martian planet, and so i cut at angles two pieces of what i think look like a variation on construction RSJ's and also a ammunition box from a 40k tank kit, i added a handle from different ammo box for extra detail and stuck it to the exposed side of the large box.

After the gluing process i used green stuff to smooth out the small mound and pushed it up against the other various pieces of detail I've added, trying to make it look like when the sands added that it has blown up against them, i also drilled and glued in two small metal rods, from a paper clip, to aid the gluing process when both the model and base are finished.

Stage 2 undercoat.

I then used blutac to stick the base to a makeshift paint stick and sprayed it with GW's skull white in a well ventilated area.

You could just as easily of used the black undercoat spray, i used white because its better visually for this article.

Always use a proper mask when using aerosols.

Stage 3 basecoats.

I basecoated all the areas i wanted rusted with Rhinox Hide, i also painted various bits of detail on the ammo box with Leadbelcher and the strap on the handle with Steel Legion Drab.

Stage 4 stippling / ink wash.

I stippled in turn Mournfang Brown, Troll Slayer Orange and Leadbelcher to random areas that are painted Rhinox Hide, i also paid attention to the edges, be careful not to add too much, its supposed to be rusted and so mostly shades of brown, i then washed the entire area with Agrax Earthshade.   

Then i edge highlighted with Leadbelcher and added a little highlight to the ammo box strap with Karak Stone.

Stage 5 sand.

Using PVA glue and a old bush i carefully painted the base where i wanted the sand to go, (this is where a black undercoat spray would of made it better to see the glue), i then placed a few stones/rocks on and sprinkled sand over and left it to dry.

Stage 6 martian basecoat.

When the PVA was dry i painted the sand area my red martian colour which is a near 50/50 mix of Khorne Red and Skrag Brown, slightly more in the browns favour.

Stage 7 drybrush.

I then drybrushed the whole red martian area including the rocks with Cadian Fleshtone, and painted the sides of the base black.

TIP, the long grasses that i've stuck to my base in the completed model picture i had to make for myself, trust me i couldn't find any like that anywhere, they where made by cutting small clumps from an old shaver's brush and gluing to the base using PVA.

A final wash of GW's Reikland Fleshshade dull's the pinkish highlights down and add's depth and shade to the base, sorry no picture for this stage.

 

 

Tau..Broadside.

Broadside...........
To go along with my firewarriors I decided the next model I would build/paint would be a Broadside, I really like these models they look extremely imposing and can imagine can dish out a world of hurt to those that wont sign up to the greater good!.
It is however a shame that the legs are static, in one pose, for the other two I have planed I will twist the torso different ways to try to avoid them all looking the same, I have so far and will be fitting them with all the missiles they are legally aloud to have and so will look very menacing indeed.

 

 

Tau..Firewarrior.

Firewarrior.........
For my second project ive opted for a Tau army, after quite a few test pieces I decided on a blue and white colour scheme, I also went heavy on the battle damage/wear, not something you see too often with Tau army's, I also purposely left the Tau sept marking off but used a slightly lighter shade of blue for the Shas'ui.
I will be adding six more to this squad and also paint up another box of them, hopefully post them soon.

The Beginning.....

Hi, this blog is for me to share with you all my journey from start to finish the creation of my version of the Scythes of the Emperor SM chapter, along the way I hope to show you all how I create and convert different models and vehicles for their chapter as well as side projects to keep me sane from all the black and yellow.

I am new to the 40k hobby, painting and playing, so are in no way an experienced veteran but during my journey I hope to show you my progression.

Anyway enough of the flannel, down to brass tac's, so far I have completed a tactical squad and rhino for them, starting small ive kit bashed a few of the tac's using forge world parts my favourite being the SM with the sniper bolter, and I have used a couple of scopes from a landraider kit for my rhino along with some chains on top, note the little scope overlooking the rear door, I used the tubing from a meltagun as a cable conduit on the back of it.

The red martian bases were finally settled on after many test pieces, I can imagine that the Scythes have searched for a suitable planet to colonise and have picked this one, maybe for mineral/fuel resources to replenish and continue there search of the hive fleet Kraken on board the Heart of Sotha, the Scythes last remaining Chapter fleet starship, or maybe to establish a new home world after the fall of Sotha.

For a little interest on the bases I have used bits of shaped plastic bought from my local hobby store, I cut and angled them in such a way that it looks like odd bits of metal and battle field debris partially covered by the red martian sand, I think I will add more of these to future model bases as I now think applying them to 3 in 10 bases isn't enough and looks a little too sparse.